commit 25bd4c976feb3ff23ea9f6a19a8e5173a90f52fb
Author: Kai Hendry <hendry_AT_webconverger.com>
Date: Sat Apr 13 11:19:58 2013 +0100
Merged FAQ from
http://git.suckless.org/st/tree/FAQ
diff --git a/st.suckless.org/index.md b/st.suckless.org/index.md
index c812ab6..73668b8 100644
--- a/st.suckless.org/index.md
+++ b/st.suckless.org/index.md
_AT_@ -48,40 +48,96 @@ The configuration is done in `config.h` (like in dwm). See the comments in the
generated `config.h` to edit it to your needs.
-Common Problems
+<abbr title="Frequently Asked Questions">FAQ</abbr>
---------------
-### 1. *random program* complains that st is unknown/not recognised/unsupported/whatever!
-It means that st doesn't have any terminfo entry on your
-system. Chances are you did not `make install`. If you just want to
-test it without installing it, you can manualy run `tic -s st.info` in st
-dir. It will compile st.info into a fully working local terminfo
-description. You can delete it when you're done.
-
-### 2. Nothing works, and nothing is said about an unknown terminal!
-* Some programs just assume they're running in xterm i.e. they don't rely on terminfo. What you see is the current state of the "xterm compliance".
-* Some programs don't complain about the lacking st description and default to another terminal. In that case see 1.
-
-### 3. I get some weird glitches/visual bug on *random program*!
-Try lauching it with a different TERM: `$ TERM=xterm myapp`. toe(1)
-will give you a list of available terminals, but you'll most likely
-switch between `xterm`, `st` or `st-256color`. The default value for TERM can be
-changed in config.h (TNAME).
-
-### 4. How do I scroll back up?
-Invoke st with a screen multiplexer like <a
-href="
http://en.wikipedia.org/wiki/GNU_Screen">GNU screen</a> or <a
-href="
http://en.wikipedia.org/wiki/Tmux">tmux</a>. `st -e screen` works
-better for [text reflowing](
http://superuser.com/a/346784/4929). To enter
-screen's scroll back mode aka "copy mode", it's C-a ESC. You probably want
-`defscrollback 10000` in your `~/.screenrc` too.
-
-### 5. Why does st not handle utmp entries?
-Use the excellent tool of [utmp](
http://git.suckless.org/utmp) for this task.
-
-
-If all else fails, send an email to a contributor/ML explaining your
-problem in detail.
+[Canonical FAQ](
http://git.suckless.org/st/tree/FAQ)
+
+## Why does st not handle utmp entries?
+
+Use the excellent tool of [utmp](
http://git.suckless.org/utmp/) for this task.
+
+## Some _random program_ complains that st is unknown/not recognised/unsupported/whatever!
+
+It means that st doesn’t have any terminfo entry on your system. Chances are
+you did not `make install`. If you just want to test it without installing it,
+you can manualy run `tic -s st.info`.
+
+## Nothing works, and nothing is said about an unknown terminal!
+
+* Some programs just assume they’re running in xterm i.e. they don’t rely on
+ terminfo. What you see is the current state of the “xterm compliance”.
+* Some programs don’t complain about the lacking st description and default to
+ another terminal. In that case see the question about terminfo.
+
+## I get some weird glitches/visual bug on _random program_!
+
+Try launching it with a different TERM: $ TERM=xterm myapp. toe(1) will give
+you a list of available terminals, but you’ll most likely switch between xterm,
+st or st-256color. The default value for TERM can be changed in config.h
+(TNAME).
+
+## How do I scroll back up?
+
+Using a terminal multiplexer.
+
+* `st -e tmux` using C-a [
+* `st -e screen` using C-a ESC
+
+## Why doesn't the Del key work in some programs?
+
+Taken from the terminfo manpage:
+
+ If the terminal has a keypad that transmits codes when the keys
+ are pressed, this information can be given. Note that it is not
+ possible to handle terminals where the keypad only works in
+ local (this applies, for example, to the unshifted HP 2621 keys).
+ If the keypad can be set to transmit or not transmit, tive these
+ codes as smkx and rmkx. Otherwise the keypad is assumed to
+ always transmit.
+
+In the st case smkx=E[?1hE= and rmkx=E[?1lE>, so it is mandatory that
+applications which want to test against keypad keys, have to send these
+sequences.
+
+But buggy applications like bash and irssi for example don't do this. A fast
+solution for them is to use the following command:
+
+ $ printf "�33?1h�33=" >/dev/tty
+
+or
+ $ echo $(tput smkx) >/dev/tty
+
+In the case of bash readline is used. Readline has a different note in its
+manpage about this issue:
+
+ enable-keypad (Off)
+ When set to On, readline will try to enable the
+ application keypad when it is called. Some systems
+ need this to enable arrow keys.
+
+Adding this option to your .inputrc will fix the keypad problem for all
+applications using readline.
+
+If you are using zsh, then read the zsh FAQ
+<
http://zsh.sourceforge.net/FAQ/zshfaq03.html#l25>:
+
+ It should be noted that the O / [ confusion can occur with other keys
+ such as Home and End. Some systems let you query the key sequences
+ sent by these keys from the system's terminal database, terminfo.
+ Unfortunately, the key sequences given there typically apply to the
+ mode that is not the one zsh uses by default (it's the "application"
+ mode rather than the "raw" mode). Explaining the use of terminfo is
+ outside of the scope of this FAQ, but if you wish to use the key
+ sequences given there you can tell the line editor to turn on
+ "application" mode when it starts and turn it off when it stops:
+
+ function zle-line-init () { echoti smkx }
+ function zle-line-finish () { echoti rmkx }
+ zle -N zle-line-init
+ zle -N zle-line-finish
+
+Putting these lines into your .zshrc will fix the problems.
Links
-----
Received on Sat Apr 13 2013 - 12:20:18 CEST