[hackers] [sbase] fix mandoc warnings || Hiltjo Posthuma

From: <git_AT_suckless.org>
Date: Tue, 24 Mar 2015 23:53:29 +0100 (CET)

commit f769c2402f4f15c3d721bce6d1cf38fd891cace1
Author: Hiltjo Posthuma <hiltjo_AT_codemadness.org>
Date: Sat Jan 31 14:43:27 2015 +0100

    fix mandoc warnings
    
    - sort references in SEE ALSO section to section number, name.
    - cols.1: proper order of sections.
    - wrap lines to max 79 column length.

diff --git a/chgrp.1 b/chgrp.1
index 0a96d12..fd7e65e 100644
--- a/chgrp.1
+++ b/chgrp.1
_AT_@ -21,8 +21,8 @@ flag is specified, this process is recursively applied to
 everything in
 .Ar file .
 .Sh SEE ALSO
-.Xr chown 1 ,
-.Xr chown 2 ,
 .Xr chmod 1 ,
+.Xr chown 1 ,
 .Xr chmod 2 ,
+.Xr chown 2 ,
 .Xr getgrnam 3
diff --git a/cols.1 b/cols.1
index 0a9c3df..2b0f221 100644
--- a/cols.1
+++ b/cols.1
_AT_@ -10,21 +10,29 @@
 .Op Ar file ...
 .Sh DESCRIPTION
 .Nm
-reads each file in sequence and writes them to stdout,
-in as many vertical columns as will fit in
+reads each file in sequence and writes them to stdout, in as many vertical
+columns as will fit in
 .Ar chars
-character columns.
-If no file is given, cols reads from stdin.
+character columns. If no
+.Ar file
+is given,
+.Nm
+reads from stdin.
 .Sh OPTIONS
 .Bl -tag -width xxxxxxxx
 .It Fl c Ar chars
 Specifies the maximum number of character columns to use
 (unless the input contains lines longer than
 .Ar chars
-characters). By default cols tries to figure out the width
-of the output device, if that fails it defaults to 65
-chars.
+characters). By default cols tries to figure out the width of the output
+device, if that fails it defaults to 65 chars.
 .El
+.Sh HISTORY
+.Nm
+is similar to the mc(1) command on Plan 9. It was renamed to
+.Nm
+to avoid the name collision with the popular file manager
+Midnight Commander.
 .Sh BUGS
 This implementation of
 .Nm
_AT_@ -33,9 +41,3 @@ and thus mishandles TAB characters (among others).
 .Pp
 .Nm
 currently mangles files which contain embedded NULs.
-.Sh HISTORY
-.Nm
-is similar to the mc(1) command on Plan 9. It was renamed to
-.Nm
-to avoid the name collision with the popular file manager
-Midnight Commander.
diff --git a/cp.1 b/cp.1
index 21a2d90..d48ce3f 100644
--- a/cp.1
+++ b/cp.1
_AT_@ -15,7 +15,7 @@
 .Op Ar directory
 .Sh DESCRIPTION
 .Nm
-copies a given file, naming it the given name. If multiple files are listed
+copies a given file, naming it the given name. If multiple files are listed
 they will be copied into the given directory.
 .Sh OPTIONS
 .Bl -tag -width Ds
_AT_@ -34,8 +34,8 @@ if an existing destination file cannot be opened, remove it and try again.
 .It Fl R
 equivalent to -r.
 .It Fl r
-copies directories recursively. If this flag is not specified, directories are
-not copied.
+copies directories recursively. If this flag is not specified, directories
+are not copied.
 .It Fl v
 print names of source and destination per file to stdout. In the format:
 "source \-> destination".
diff --git a/cut.1 b/cut.1
index 5ba08cf..2a606a1 100644
--- a/cut.1
+++ b/cut.1
_AT_@ -67,5 +67,5 @@ utility is compliant with the
 .St -p1003.1-2008
 specification.
 .Pp
-The possibility of separating numbers and ranges with a space
-and specifying multibyte delimiters of arbitrary length is an extension to that specification.
+The possibility of separating numbers and ranges with a space and specifying
+multibyte delimiters of arbitrary length is an extension to that specification.
diff --git a/du.1 b/du.1
index 641a7bf..23162dc 100644
--- a/du.1
+++ b/du.1
_AT_@ -15,9 +15,11 @@
 .Nm
 displays the file system block usage for each
 .Ar file
-argument and for each directory in the file hierarchy rooted in directory argument.
-If no file is specified, the block usage of the hierarchy rooted in the current
-directory is displayed.
+argument and for each directory in the file hierarchy rooted in directory
+argument. If no
+.Ar file
+is specified, the block usage of the hierarchy rooted in the current directory
+is displayed.
 .Sh OPTIONS
 .Bl -tag -width Ds
 .It Fl a
diff --git a/expand.1 b/expand.1
index 4ed6301..ded96f6 100644
--- a/expand.1
+++ b/expand.1
_AT_@ -37,8 +37,8 @@ The default
 is "8".
 .El
 .Sh SEE ALSO
-.Xr unexpand 1 ,
-.Xr fold 1
+.Xr fold 1 ,
+.Xr unexpand 1
 .Sh STANDARDS
 The
 .Nm
diff --git a/expr.1 b/expr.1
index c66c389..f2cb62d 100644
--- a/expr.1
+++ b/expr.1
_AT_@ -76,7 +76,8 @@ against
 is anchored with an implicit '^'.
 .Pp
 You can't directly match the empty string, since zero matched characters
-resolve equally to a failed match. To work around this limitation, use "expr X'' : 'X$' instead of "expr '' : '$'"
+resolve equally to a failed match. To work around this limitation, use
+"expr X'' : 'X$' instead of "expr '' : '$'"
 .El
 .Sh EXIT STATUS
 .Bl -tag -width Ds
diff --git a/grep.1 b/grep.1
index d8a2278..50daa8e 100644
--- a/grep.1
+++ b/grep.1
_AT_@ -17,7 +17,7 @@ searches the input files for lines that match the
 .Ar pattern ,
 a regular expression as defined in
 .Xr regex 7 .
-By default each matching line is printed to stdout. If no file is given
+By default each matching line is printed to stdout. If no file is given
 .Nm
 reads from stdin.
 .Sh OPTIONS
_AT_@ -25,8 +25,8 @@ reads from stdin.
 .It Fl E
 Match using extended regex.
 .It Fl F
-Match using fixed strings. Treat each pattern specified as a string instead of a regular
-expression.
+Match using fixed strings. Treat each pattern specified as a string instead of
+a regular expression.
 .It Fl H
 Prefix each matching line with its filename in the output. This is the
 default when there is more than one file specified.
_AT_@ -54,7 +54,8 @@ Prefix each matching line with its line number in the input.
 .It Fl q
 Print nothing, only return status.
 .It Fl s
-Suppress the error messages ordinarily written for nonexistent or unreadable files.
+Suppress the error messages ordinarily written for nonexistent or unreadable
+files.
 .It Fl v
 Select lines which do
 .Sy not
_AT_@ -62,8 +63,9 @@ match the pattern.
 .It Fl w
 The expression is searched for as a word (as if surrounded by '\<' and '\>').
 .It Fl x
-Consider only input lines that use all characters in the line excluding the terminating <newline> to
-match an entire fixed string or regular expression to be matching lines.
+Consider only input lines that use all characters in the line excluding the
+terminating <newline> to match an entire fixed string or regular expression to
+be matching lines.
 .El
 .Sh EXIT STATUS
 .Bl -tag -width Ds
_AT_@ -75,8 +77,8 @@ No lines were matched.
 An error occurred.
 .El
 .Sh SEE ALSO
-.Xr regex 7 ,
-.Xr sed 1
+.Xr sed 1 ,
+.Xr regex 7
 .Sh STANDARDS
 The
 .Nm
diff --git a/kill.1 b/kill.1
index f54df3b..30c0373 100644
--- a/kill.1
+++ b/kill.1
_AT_@ -22,19 +22,18 @@ by default sends a TERM signal to the given processes.
 .Sh OPTIONS
 .Bl -tag -width Ds
 .It Fl s Ar signal_name
-A symbolic signal name specifying the signal to be sent instead
-of the default SIGTERM.
-Sends the named signal.
+A symbolic signal name specifying the signal to be sent instead of the
+default SIGTERM. Sends the named signal.
 .It Fl l Op Ar exit_status
-Lists available signals. If an
+Lists available signals. If an
 .Ar exit_status
 is given, only the corresponding signal name will be printed.
 .It Fl signal_name
 A symbolic signal name specifying the signal to be sent instead
 of the default SIGTERM.
 .It Fl signal_number
-A non-negative decimal integer specifying the signal to be sent
-instead of the default SIGTERM.
+A non-negative decimal integer specifying the signal to be sent instead of
+the default SIGTERM.
 .El
 .Sh SEE ALSO
 .Xr kill 2 ,
diff --git a/ln.1 b/ln.1
index f26f832..048a850 100644
--- a/ln.1
+++ b/ln.1
_AT_@ -41,8 +41,8 @@ exists, remove it to allow the link.
 .It Fl L | Fl P
 If
 .Ar target
-is a symbolic link, create a hard link to the (referenced file) | (symbolic link itself).
-The former is the default.
+is a symbolic link, create a hard link to the (referenced file) |
+(symbolic link itself). The former is the default.
 .It Fl s
 Create symbolic links instead of hard links.
 Disables
diff --git a/logger.1 b/logger.1
index 2c71d7f..4d14e6d 100644
--- a/logger.1
+++ b/logger.1
_AT_@ -20,10 +20,10 @@ system log module.
 .It Fl i
 Log the process ID of the logger process with each line.
 .It Fl p Ar priority
-Enter the message with the specified priority. They priority
-has to be specified symbolically as
+Enter the message with the specified priority. They priority has to be
+specified symbolically as
 .Dq facility.level
-pair. The default is
+pair. The default is
 .Dq user.notice .
 .It Fl s
 Log the message to standard error, as well as the system log.
_AT_@ -31,12 +31,11 @@ Log the message to standard error, as well as the system log.
 Mark every line in the log with the specified
 .Ar tag .
 .It Ar message
-Write the message to the log; if not specified, standard input
-is logged.
+Write the message to the log; if not specified, standard input is logged.
 .El
 .Sh SEE ALSO
-.Xr syslog 3 ,
-.Xr syslogd 1
+.Xr syslogd 1 ,
+.Xr syslog 3
 .Sh STANDARDS
 The
 .Nm
diff --git a/ls.1 b/ls.1
index 6037f97..a2e9b0d 100644
--- a/ls.1
+++ b/ls.1
_AT_@ -10,7 +10,7 @@
 .Op Ar file ...
 .Sh DESCRIPTION
 .Nm
-lists each given file, and the contents of each given directory. If no files
+lists each given file, and the contents of each given directory. If no files
 are given the current directory is listed.
 .Sh OPTIONS
 .Bl -tag -width Ds
diff --git a/mktemp.1 b/mktemp.1
index 67f20b2..22d414b 100644
--- a/mktemp.1
+++ b/mktemp.1
_AT_@ -10,17 +10,17 @@
 .Op Ar template
 .Sh DESCRIPTION
 .Nm
-takes the given filename template and overwrites a portion of it
-to create a unique filename. The template may be any filename with at least
-six `Xs' appended to it. If no template is specified a default of
-`tmp.XXXXXXXXXX' is used and the tmpdir is set to `/tmp' unless the
-TMPDIR envrionment variable has been set.
+takes the given filename template and overwrites a portion of it to create a
+unique filename. The template may be any filename with at least six `Xs'
+appended to it. If no template is specified a default of `tmp.XXXXXXXXXX' is
+used and the tmpdir is set to `/tmp' unless the TMPDIR envrionment variable
+has been set.
 .Sh OPTIONS
 .Bl -tag -width Ds
 .It Fl d
 Make a directory instead of a file
 .It Fl q
-Fail silently if an error occurs. This is useful if a script
+Fail silently if an error occurs. This is useful if a script
 does not want error output to go to standard error.
 .El
 .Sh SEE ALSO
diff --git a/nice.1 b/nice.1
index 51962a4..c333cf7 100644
--- a/nice.1
+++ b/nice.1
_AT_@ -30,8 +30,8 @@ to
 Default is 10.
 .El
 .Sh SEE ALSO
-.Xr renice 2 ,
-.Xr nice 2
+.Xr nice 2 ,
+.Xr renice 2
 .Sh STANDARDS
 The
 .Nm
diff --git a/nl.1 b/nl.1
index b371181..188e479 100644
--- a/nl.1
+++ b/nl.1
_AT_@ -14,8 +14,9 @@
 .Nm
 reads lines from the named
 .Ar file
-and writes them to stdout with non-empty lines
-numbered. If no file is given
+and writes them to stdout with non-empty lines numbered. If no
+.Ar file
+is given
 .Nm
 reads from stdin.
 .Sh OPTIONS
_AT_@ -38,7 +39,7 @@ a regular expression as defined in
 .It Fl i Ar incr
 Defines the increment between numbered lines.
 .It Fl s Ar sep
-Defines the string used to separate line numbers and lines. By default this is
+Defines the string used to separate line numbers and lines. By default this is
 a tab.
 .El
 .Sh SEE ALSO
diff --git a/renice.1 b/renice.1
index 1991d8b..c850c5b 100644
--- a/renice.1
+++ b/renice.1
_AT_@ -32,8 +32,8 @@ to
 (lowest priority).
 .El
 .Sh SEE ALSO
-.Xr renice 2 ,
-.Xr nice 2
+.Xr nice 2 ,
+.Xr renice 2
 .Sh STANDARDS
 The
 .Nm
diff --git a/rmdir.1 b/rmdir.1
index 2dc3fc3..5b9a448 100644
--- a/rmdir.1
+++ b/rmdir.1
_AT_@ -22,8 +22,8 @@ and its parents in the pathname
 .El
 .Sh SEE ALSO
 .Xr rm 1 ,
-.Xr rmdir 2 ,
 .Xr unlink 1 ,
+.Xr rmdir 2 ,
 .Xr unlink 2
 .Sh STANDARDS
 The
diff --git a/strings.1 b/strings.1
index 9d190fb..4809491 100644
--- a/strings.1
+++ b/strings.1
_AT_@ -10,7 +10,11 @@
 .Sh DESCRIPTION
 .Nm
 prints the printable character sequences that are at least 6 characters
-long. If no files are given then it uses stdin.
+long. If no
+.Ar files
+are given,
+.Nm
+reads from stdin.
 .Sh STANDARDS
 .Nm
 mirrors the semantics of Plan9
diff --git a/tail.1 b/tail.1
index ad4cf04..fe5e5a9 100644
--- a/tail.1
+++ b/tail.1
_AT_@ -10,12 +10,15 @@
 .Op Ar file
 .Sh DESCRIPTION
 .Nm
-writes the last 10 lines of the file to stdout. If no file is given, tail reads
-from stdin.
+writes the last 10 lines of the file to stdout. If no
+.Ar file
+is given,
+.Nm
+reads from stdin.
 .Sh OPTIONS
 .Bl -tag -width Ds
 .It Fl n Ar lines
-outputs the given number of lines. If
+outputs the given number of lines. If
 .Ar lines
 begins with '+' it is used as an offset from the beginning of the file.
 .El
diff --git a/touch.1 b/touch.1
index 2f58bad..1ec7d0f 100644
--- a/touch.1
+++ b/touch.1
_AT_@ -11,23 +11,21 @@
 .Ar file ...
 .Sh DESCRIPTION
 .Nm
-sets the access and modification times of files to the current time of day. If the file
-doesn't exist, it is created with the default permissions.
+sets the access and modification times of files to the current time of day. If
+the file doesn't exist, it is created with the default permissions.
 .Sh OPTIONS
 .Bl -tag -width Ds
 .It Fl a
 Set the access time of the file.
 .It Fl c
-Do not create the file it it does not exist. The exit
-status is not affected.
+Do not create the file it it does not exist. The exit status is not affected.
 .It Fl m
 Change the modification time of the file.
 .It Fl t Ar stamp
 Set the timestamp to be used with
 .Op Fl am .
-The format of the timestamp is simply the number of seconds
-since Jan 1, 1970. This specification of time does not conform
-to POSIX.
+The format of the timestamp is simply the number of seconds since Jan 1, 1970.
+This specification of time does not conform to POSIX.
 .El
 .Sh SEE ALSO
 .Xr date 1
diff --git a/tr.1 b/tr.1
index c98a3e8..c682f80 100644
--- a/tr.1
+++ b/tr.1
_AT_@ -71,8 +71,8 @@ Input processed successfully.
 An error occurred.
 .El
 .Sh SEE ALSO
-.Xr sed 1 ,
 .Xr awk 1 ,
+.Xr sed 1 ,
 .Xr utf8 7
 .Sh STANDARDS
 The
diff --git a/uuencode.1 b/uuencode.1
index 922fbe9..95d3c66 100644
--- a/uuencode.1
+++ b/uuencode.1
_AT_@ -10,10 +10,9 @@
 .Ar name
 .Sh DESCRIPTION
 .Nm
-reads file (or by default, the standard input) and writes an encoded
-version to the standard output. The encoding uses only printing ASCII
-characters and includes the mode of the file and the operand name
-for use by uudecode.
+reads file (or by default, the standard input) and writes an encoded version
+to the standard output. The encoding uses only printing ASCII characters and
+includes the mode of the file and the operand name for use by uudecode.
 .Sh IMPLEMENTATION NOTES
 This version of uuencode does not currently support the base64
 encoding algorithm.
diff --git a/wc.1 b/wc.1
index b28b0a5..639e86f 100644
--- a/wc.1
+++ b/wc.1
_AT_@ -10,9 +10,13 @@
 .Op Ar file ...
 .Sh DESCRIPTION
 .Nm
-.Pp
-prints the number of lines, words, and bytes in each file. If any flags are
-given, wc will print only the requested information. If no files are given, wc
+prints the number of lines, words, and bytes in each file. If any flags are
+given,
+.Nm
+will print only the requested information. If no
+.Ar files
+are given,
+.Nm
 reads stdin.
 .Sh OPTIONS
 .Bl -tag -width Ds
Received on Tue Mar 24 2015 - 23:53:29 CET